D-Link DIR-505 Manual - Page 138
Device Name, LAN Connection, IP Address, Subnet Mask, Local Domain, DHCP Server, Settings
View all D-Link DIR-505 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 138 highlights
Section 3 - Configuration LAN Setup This section will allow you to change the local network settings of the access point and to configure the DHCP settings. Device Name: Enter the Device Name of the AP. It is recommended to change the Device Name if there is more than one D-Link device within the subnet. LAN Connection Dynamic IP (DHCP) automatically obtains an IP address Type: on the LAN/private network. IP Address: Enter the IP address of the access point. The default IP address is 192.168.0.1. If you change the IP address, once you click Save, you will need to enter the new IP address in your browser to get back into the configuration utility. Subnet Mask: Enter the Subnet Mask assigned by your ISP. Local Domain Enter the local domain Name. Name: DHCP Server Configure the built-in DHCP server to assign IP addresses Settings: to the computer on your network. D-Link DIR-505 User Manual 132