D-Link DIR-505 Manual - Page 90
LAN Setup
View all D-Link DIR-505 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
Section 3 - Configuration LAN Setup Device Name: Allows you to configure the device more easily when your network is using TCP/IP protocol. Enter a name for your device. My LAN Select from the drop-down menu the Operation Mode you would Connection: like to use. IP Address: Enter the IP address assigned by your ISP. Subnet Mask: Enter the Subnet Mask assigned by your ISP. Gateway Address: Enter the Gateway assigned by your ISP. Primary/ Secondary DNS Server: Enter the Primary and Secondary DNS server IP addresses assigned by your ISP. These addresses are usually obtained automatically from your ISP. Enter the value 0.0.0.0 if you did not specifically receive these from your ISP. D-Link DIR-505 User Manual 84
84
D-Link DIR-505 User Manual
Section 3 - Configuration
LAN Setup
Device Name:
My LAN
Connection:
IP Address:
Subnet Mask:
Gateway Address:
Primary/ Secondary
DNS Server:
Allows you to configure the device more easily when your network
is using TCP/IP protocol.
Enter a name for your device.
Select from the drop-down menu the Operation Mode you would
like to use.
Enter the IP address assigned by your ISP.
Enter the Subnet Mask assigned by your ISP.
Enter the Gateway assigned by your ISP.
Enter the Primary and Secondary DNS server IP addresses
assigned by your ISP. These addresses are usually obtained
automatically from your ISP. Enter the value 0.0.0.0 if you
did not specifically receive these from your ISP.