D-Link DIR-505 Manual - Page 135
Internet Settings
View all D-Link DIR-505 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 135 highlights
Section 3 - Configuration Internet Settings This section will allow you to change the local network settings of the access point and to configure the DHCP settings. My Internet Use the drop-down menu to select Dynamic IP (DHCP) Connection is: to automatically obtain an IP address on the LAN/private network. Host Name: The Host Name is optional but may be required by some ISPs. Leave blank if you are not sure. MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1500 is the default MTU. Mac Address: The default MAC Address is set to the Internet port's physical interface MAC address on the Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP. You can use the Clone Your PC's MAC Address button to replace the Internet port's MAC address with the MAC address of your Ethernet card. Wi-Fi Protected Select to enable this feature. Setup: D-Link DIR-505 User Manual 129