D-Link DIR-505 Manual - Page 74
Maintenance - d link login
View all D-Link DIR-505 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Section 3 - Configuration Maintenance Admin This page will allow you to change the Administrator and User passwords. You can also enable Remote Management. There are two accounts that can access the management interface through the web browser. The accounts are admin and user. Admin has read/write access while user has read-only access. User can only view the settings but cannot make any changes. Only the admin account has the ability to change both admin and user account passwords. Admin Enter a new password for the Administrator Login Name. The Password: administrator can make changes to the settings. User Password: Enter the new password for the User login. If you login as the User, you cannot change the settings (you can only view them). Enable Graphical Enables a challenge-response test to require users to type letters Authentication: or numbers from a distorted image displayed on the screen to prevent online hackers and unauthorized users from gaining access to your router's network settings. Enable HTTPS Check to enable HTTPS to connect to the router securely. This Server: meanstoconnecttotherouter,youmustenterhttps://192.168.0.1 (for example) instead of http://192.168.0.1. Enable Remote Remote management allows the DIR-505 to be configured from the Internet by a web browser. A username/password is still required to Management: access the Web Management interface. Remote Admin The port number used to access the DIR-505 is used in the URL. Example: http://x.x.x.x:8080 whereas x.x.x.x is the Internet IP address of Port: the DIR-505 and 8080 is the port used for the Web Management interface. If you have enabled HTTPS Server, you must enter https:// as part of the URL to access the router remotely. D-Link DIR-505 User Manual 68