D-Link DIR-818LW User Manual - Page 32

Section 3 - Configuration Internet Setup PPTP Choose PPTP (Point-to-Point-Tunneling Protocol) if your ISP (Internet Service Provider) uses a PPTP connection. Your ISP will provide you with a username and password. My Internet Select PPTP (Username/Password) from the drop-down menu. Connection is: Address Mode: In most cases, select Dynamic IP. Select Static IP if your ISP assigned you the IP address, subnet mask, gateway, and DNS server addresses. PPTP IP Address: Enter the IP Address (Static PPTP only). PPTP Subnet Enter the Subnet Mask (Static PPTP only). Mask: PPTP Gateway IP Enter the Gateway IP Address provided by your ISP (Static PPTP only). Address: PPTP Server IP Enter the Server IP Address provided by your ISP (optional). Address: Username: Enter your PPTP Username. Password: Enter your PPTP Password and then retype the password in the next box. Reconnect Mode: Select either Always-on, On-Demand, or Manual. Maximum Idle Enter a Maximum Idle Time during which the Internet connection is maintained during inactivity. Enable Auto-reconnect to disable this Time: feature. DNS Servers: Enter the Primary and Secondary DNS Server Addresses. The DNS server information will be supplied by your ISP. D-Link DIR-818LW User Manual 27