D-Link DIR-818LW User Manual - Page 72

Section 3 - Configuration IPv6 in IPv4 Tunnel My IPv6 Connection is: Select IPv6 in IPv4 Tunnel from the drop-down menu. IPv6 in IPv4 Tunnel Enter the settings supplied by your Internet provider (ISP). Settings: IPv6 DNS Settings: Select either Obtain IPv6 DNS Servers automatically or Use the following IPv6 DNS Servers Primary/Secondary Enter the primary and secondary DNS server addresses. IPv6 DNS Servers: Enable DHCP-PD: Check this box to enable DHCP prefix delegation. LAN IPv6 Address: Enter the LAN (local) IPv6 address for the router. LAN IPv6 Link-Local Displays the router's LAN Link-Local Address. Address: Enable Automatic IPv6 Check to enable the Autoconfiguration feature. Address Assignment: Enable Automatic Check to enable prefix delegation for routers in your LAN. DHCP-PD in LAN: Autoconfiguration Select SLAAC + RDNSS or SLAAC + Stateless DHCP, or Stateful Type: DHCPv6. IPv6 Address Range Enter the start IPv6 Address for the DHCPv6 range for your local Start: computers. IPv6 Address Range Enter the end IPv6 Address for the DHCPv6 range for your local End: computers. Router Advertisement Enter the Router Advertisement Lifetime (in minutes). Lifetime: Click Save Settings. D-Link DIR-818LW User Manual 67