D-Link DIR-818LW User Manual - Page 65
Static IPv6 Address Connection, configuration settings. You must enter the IPv6 address
View all D-Link DIR-818LW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Section 3 - Configuration Static IPv6 Address Connection This mode is used when your ISP provides you with a set IPv6 address that does not change. The IPv6 information is manually entered in your IPv6 configuration settings. You must enter the IPv6 address, Subnet Prefix Length, Default Gateway, Primary DNS Server, and Secondary DNS Server. Your ISP provides you with all this information. Use Link-Local The Link-local address is used by nodes and routers when Address: communicating with neighboring nodes on the same link. This mode enables IPv6-capable devices to communicate with each other on the LAN side. IPv6 Address: Enter the WAN IPv6 Address for the router here. Subnet Prefix Enter the WAN Subnet Prefix Length value used here. Length: Default Gateway: Enter the WAN Default Gateway IPv6 address used here. Primary IPv6 DNS Enter the WAN primary DNS Server address used here. Address: Secondary IPv6 Enter the WAN secondary DNS Server address used here. DNS Address: LAN IPv6 Address: These are the settings of the LAN (Local Area Network) IPv6 interface for the router. The router's LAN IPv6 Address configuration is based on the IPv6 Address and Subnet assigned by your ISP. (A subnet with prefix /64 is supported in LAN.) Click on Next to continue. D-Link DIR-818LW User Manual 60