D-Link DIR-818LW User Manual - Page 73
to 4 Tunneling, SLAAC + RDNSS, SLAAC + Stateless DHCP, Stateful, DHCPv6, Save Settings
View all D-Link DIR-818LW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Section 3 - Configuration 6 to 4 Tunneling My IPv6 Connection is: Select 6 to 4 from the drop-down menu. WAN IPv6 Enter the IPv6 settings supplied by your Internet Service Provider AddressSettings: (ISP). Primary/Secondary Enter the primary and secondary IPv6 DNS server addresses. IPv6 DNS Servers: LAN IPv6 Address: Enter the LAN (local) IPv6 address for the router. LAN IPv6 Link-Local Displays the Router's LAN IPv6 Link-Local Address. Address: Enable Automatic IPv6 Check to enable the Autoconfiguration feature. Address Assignment: Autoconfiguration Select SLAAC + RDNSS or SLAAC + Stateless DHCP, or Stateful Type: DHCPv6. IPv6 Address Range Enter the start IPv6 Address for the DHCPv6 range for your local Start: computers. IPv6 Address Range Enter the end IPv6 Address for the DHCPv6 range for your local End: computers. Router Advertisemt Enter the Router Advertisement Lifetime (in minutes). Lifetime: Click Save Settings. D-Link DIR-818LW User Manual 68