D-Link DMP-100 User Guide - Page 19
Selecting Internal or External Chime, Changing System Prompts
UPC - 790069224652
View all D-Link DMP-100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
♦ Selecting Internal or External Chime The DMP-100 may be interfaced to an external cabin chime or tone generator. A chime will be sounded whenever a speech track is selected or triggered (selecting or triggering a music track will not sound a chime.) When sounding an external chime, the DMP-100 will pause for several seconds before starting to play the track, to allow the chime to finish. The exact length of this pause can be configured in Setup Mode. Please refer to the "DMP-100 Installation Guide", AI document number DMP010, for information on entering Setup Mode and changing this setting. You can also choose an MP3 file to be played as the chime sound. Select Internal Chime and then click Browse to select the MP3 file to be played. Several chime sounds are provided in the /Chimes directory under the main CardPrep directory. Note that when internal chime is selected, the DMP-100 does not activate the external chime signal. This allows you to switch between cards using internal or external chimes without having to physically disable the external chime. To defeat chiming completely, select Disable chime. There will be no delay when playing a speech track and the external chime signal will not be activated. ♦ Changing System Prompts Most of the text displayed by the DMP-100 in normal operation is actually stored on the memory card and can be changed via CardPrep. This was intended to allow for translation of the system prompts into languages other than English. Clicking on the "System Text..." button brings up the following screen: DMP-100 USERS GUIDE P/N DMP020 V1.7 PAGE 19 OF 23