D-Link DMP-100 User Guide - Page 8

TO PLAY A SPEECH FILE: „ Rotate the knob CW or CCW until the title of the desired file is displayed. If "RETURN TO MENU" is displayed at either position, push the knob and then rotate fully CW or CCW. „ Push the knob to begin playback. The file will be played once for each language enabled, if the file exists in those languages. „ The display indicates that playback is in progress. This display can either be elapsed playback time, or can be cycling user prompts. Please see the DMP-100 Installation Manual for more information. „ When playback is complete, the audio stops and the display points to the NEXT speech file, as if the knob had been turned CW once. TO PLAY A MUSIC FILE: „ Rotate the knob CW or CCW until the name of the desired music list is displayed. If "RETURN TO MENU" is displayed at either end, push the knob and then rotate CW or CCW to select. „ Push the knob to select the music list. Then rotate the knob to select either "PLAY WHOLE LIST" or the desired music track. Push the knob to begin playback. The display can either be elapsed playback time, or can be cycling user prompts. Please see the DMP-100 Installation Manual for more information. „ Instead of explicitly choosing a music list and music track, you can select "CONTINUOUS MIX" at the top-level menu. This will play a continuous random selection of all music tracks on the card. TO PAUSE PLAYBACK: „ Press the knob. This will put the playback into "PAUSED" mode. „ To resume playback, press the knob again. TO CANCEL PLAYBACK : „ Press and hold the knob for at least three seconds. TO CHANGE VOLUME LEVEL: „ Push and turn the knob in either direction. The volume can be adjusted even if no track is playing. When adjusting the volume, the display will temporarily display: "Volume: XX" where "XX" is a number between 1 (min volume) and 28 (max volume). DMP-100 USERS GUIDE P/N DMP020 V1.7 PAGE 8 OF 23