Dell 1130 Laser Mono Printer User's Guide - Page 26
Network setup (Dell 1130n only
View all Dell 1130 Laser Mono Printer manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Network setup (Dell 1130n only) This chapter gives you step-by-step instructions for setting up the network connected machine and software. This chapter includes: Network environment Introducing useful network programs Using a wired network Installing network connected machine's driver IPv6 Configuration Network environment You need to set up the network protocols on the machine to use it as your network machine. The following table shows the network environments supported by the machine: Item Requirements Network interface Ethernet 10/100 Base-TX Network operating system Windows 2000/XP/Server 2003/Server 2008/Vista/7/2008 Server R2 Various Linux OS Mac OS X 10.3 ~ 10.6 Network protocols TCP/IPv4 DHCP, BOOTP DNS, WINS, Bonjour, SLP, UPnP Standard TCP/IP Printing (RAW), LPR, IPP SNMPv 1/2/3, HTTP, IPSec TCP/IPv6 (DHCP, DNS, RAW, LPR, SNMPv 1/2/3, HTTP, IPSec (See IPv6 Configuration.) Introducing useful network programs There are several programs available to setup the network settings in network environment. Before using the programs below, set the IP address first. Embedded Web Service Web server embedded on your network machine, which allows you to: Configure the network parameters necessary for the machine to connect to various network environments. Customize machine settings. (See Using Embedded Web Service (Dell 1130n only).) SetIP This utility program allows you to select a network interface and manually configure the IP addresses for use with the TCP/IP protocol. (See IP setting using SetIP Program) TCP/IPv6 is not supported by this program. Using a wired network