Dell Alienware 13 R3 Service Manual - Page 56
Replace the, Turn the computer over.
View all Dell Alienware 13 R3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
10 Turn the computer over. 11 Slide the display cable into the connector on the system board and close the latch to secure the cable. 12 Connect the power-button board cable to the system board. 13 Connect the logo-board cable to the system board. Post-requisites 1 Replace the heat-sink assembly. 2 Replace the battery. 3 Replace the coin-cell battery. 4 Replace the computer base. 5 Replace the rear-I/O cover. 6 Replace the memory modules. 7 Replace the solid-state drive. 8 Replace the wireless card. 9 Replace the base cover. 56
10
Turn the computer over.
11
Slide the display cable into the connector on the system board and close the
latch to secure the cable.
12
Connect the power-button board cable to the system board.
13
Connect the logo-board cable to the system board.
Post-requisites
1
Replace the
heat-sink assembly
.
2
Replace the
battery
.
3
Replace the
coin-cell battery
.
4
Replace the
computer base
.
5
Replace the
rear-I/O cover
.
6
Replace the
memory modules
.
7
Replace the
solid-state drive
.
8
Replace the
wireless card
.
9
Replace the
base cover
.
56