Dell Alienware 13 R3 Service Manual - Page 98
Replacing the display hinges, Procedure, Post-requisites
View all Dell Alienware 13 R3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
Replacing the display hinges WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure 1 Align the screw holes on the display hinges with the screw holes on the display back-cover and antenna assembly. 2 Replace the eight screws (M2.5x2.0L) that secure the display hinges to the display back-cover and antenna assembly. 3 Route the antenna cables through the routing guides on the display backcover and antenna assembly. 4 Route the logo-board cable through the routing guides on the display backcover and antenna assembly. 5 Route the display cable through the routing guides on the display back-cover and antenna assembly. 6 Place the hinge caps on the display hinges and press down to snap them into place. Post-requisites 1 Replace the display panel. 2 Replace the display bezel. 3 Replace the display assembly. 4 Replace the system board. 5 Replace the battery. 6 Replace the heat-sink assembly. 7 Replace the coin-cell battery. 8 Replace the computer base. 98