Dell Alienware 13 R3 Service Manual - Page 79
Removing the display bezel, Prerequisites, Procedure, touch screen display.
View all Dell Alienware 13 R3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Removing the display bezel WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Prerequisites NOTE: These instructions are applicable only for laptops with a nontouch screen display. 1 Remove the base cover. 2 Remove the wireless card. 3 Remove the solid-state drive. 4 Remove the memory modules. 5 Remove the rear-I/O cover. 6 Remove the computer base. 7 Remove the coin-cell battery. 8 Remove the battery. 9 Remove the heat-sink assembly. 10 Remove the system board. 11 Remove the display assembly. Procedure 1 Using your fingertips, carefully pry up the inside edges of the display bezel. 79