Dell Alienware 13 R3 Service Manual - Page 57
Removing the speakers, Prerequisites, Procedure
View all Dell Alienware 13 R3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Removing the speakers WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Prerequisites 1 Remove the base cover. 2 Remove the wireless card. 3 Remove the solid-state drive. 4 Remove the memory modules. 5 Remove the rear-I/O cover. 6 Remove the computer base. 7 Remove the coin-cell battery. 8 Remove the battery. 9 Remove the heat-sink assembly. 10 Remove the system board. Procedure 1 Remove the screw (M2x3) that secures the speaker to the palm-rest assembly. 2 Lift the left speaker off the palm-rest assembly. 3 Peel off the tape that secures the speaker cable to the palm-rest assembly. 4 Remove the speaker cable from the routing guides on the palm-rest assembly. 57