Dell Alienware 13 R3 Service Manual - Page 85
Replacing the camera cable, Procedure, Post-requisites
View all Dell Alienware 13 R3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Replacing the camera cable WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure 1 Route the camera cable through the routing guides on the display back-cover and antenna assembly. 2 Connect the camera cable to the camera module. Post-requisites 1 Replace the display hinges. 2 Replace the display panel. 3 Replace the display bezel. 4 Replace the display assembly. 5 Replace the system board. 6 Replace the battery. 7 Replace the heat-sink assembly. 8 Replace the coin-cell battery. 9 Replace the computer base. 10 Replace the rear-I/O cover. 11 Replace the memory modules. 12 Replace the solid-state drive. 13 Replace the wireless card. 14 Replace the base cover. 85