Dell Alienware x16 R2 Owners Manual - Page 80
Graphics-card fan, Removing the graphics-card fan
![]() |
View all Dell Alienware x16 R2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
Steps 1. Align and place the processor fan into the slot on the palm-rest and keyboard assembly. 2. Replace the two screws (M2x4) that secure the processor fan to the palm-rest and keyboard assembly. 3. Route the speaker cable and the antenna cable through the routing guides on the bottom of the processor fan. 4. Connect the processor-fan cable and speaker cable to the system board. Next steps 1. Install the wireless card. 2. Install the base cover. 3. Follow the procedure in After working inside your computer. Graphics-card fan Removing the graphics-card fan CAUTION: The information in this removal section is intended for authorized service technicians only. Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. About this task The following images indicate the location of the graphics-card fan and provide a visual representation of the removal procedure. 80
![](/manual_guide/products/dell-alienware-x16-r2-owners-manual-22e204b/80.png)