Dell Force10 MXL Blade Getting Started Guide - Page 24
Thank you for using the Dell Easy Setup Wizard.
View all Dell Force10 MXL Blade manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
This is the configuration information that has been collected: SNMP Interface = "mxl1"@1.1.1.1 User Account setup = root Password = ****** Out-of-band IP address = 192.168.2.1 255.255.255.0 VLAN1 Router Interface IP = 2.2.2.80 255.255.255.0 Default Gateway = 192.168.2.0 If the information is correct, please enter (Y) to save the configuration. If the information is incorrect, enter (N) to discard the configuration and restart the wizard: [Y/N] y Thank you for using the Dell Easy Setup Wizard. You will now enter CLI mode. Applying Interface configuration, please wait ... FTOS> NOTE: If you do not save the initial configuration settings, they will be lost at the next switch reboot and the Setup Wizard will be invoked. To save the initial configuration to the startup configuration, enter the following commands at the CLI prompt on the attached console: FTOS> enable FTOS# write memory 24 Installing and Configuring the Switch