Dell Force10 MXL Blade Getting Started Guide - Page 9
Port Numbering
View all Dell Force10 MXL Blade manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Port Numbering When installed in a PowerEdge M1000e Enclosure, the MXL 10/40GbE Switch ports are numbered 33 to 56 from the bottom to the top of the switch: • 40GbE base-module ports: • In 40GbE mode of operation, the ports are numbered 33 and 37. • In 4x10GbE mode of operation, the ports are numbered 33 to 36 and 37 to 40. For information about how to change a 40GbE port to 4x10GbE mode, refer to "Splitting 40GbE QSFP+ Ports into 10GbE SFP+ Ports" on page 30. • 2-Port 40-GbE QSFP+ module operating in the default 4x10GbE mode: • In expansion slot 0, the ports are numbered 41 to 44 and 45 to 48. • In expansion slot 1, the ports are numbered 49 to 52 and 53 to 56. For information about how to change a port from 4x10GbE to 40GbE mode of operation, refer to "FlexIOTM Plug-in Modules" on page 7. • 2-Port 40-GbE QSFP+ module operating in 40GbE mode: • In expansion slot 0, the ports are numbered 41 and 45. • In expansion slot 1, the ports are numbered 49 and 53. • 4-Port 10-GbE SFP+ or 10GBASE-T module: • In expansion slot 0, the ports are numbered 41 to 44. • In expansion slot 1, the ports are numbered 49 to 52. Hardware Overview 9