Dell Force10 Z9000 FTOS Configuration Guide for Z9000 System - Page 55

Apply a Privilege Level to a Username To set a privilege level for a user: Task Configure a privilege level for a user. Command Syntax username username privilege level Command Mode CONFIGURATION Apply a Privilege Level to a Terminal Line To set a privilege level for a terminal line: Task Configure a privilege level for a terminal line. Command Syntax privilege level level Command Mode LINE Note: When you assign a privilege level between 2 and 15, access to the system begins at EXEC mode, but the prompt is hostname#, rather than hostname>. Configure Logging FTOS tracks changes in the system using event and error messages. By default, FTOS logs these messages on: • the internal buffer • console and terminal lines, and • any configured syslog servers Disable Logging To disable logging: Task Disable all logging except on the console. Disable logging to the logging buffer. Disable logging to terminal lines. Disable console logging. Command Syntax Command Mode no logging on no logging buffer no logging monitor no logging console CONFIGURATION CONFIGURATION CONFIGURATION CONFIGURATION Management | 55