Dell Force10 Z9000 FTOS Configuration Guide for Z9000 System - Page 790

www.dell.com | support.dell.com Configure custom privilege levels In addition to assigning privilege levels to the user, you can configure the privilege levels of commands so that they are visible in different privilege levels. Within FTOS, commands have certain privilege levels. With the privilege command, the default level can be changed or you can reset their privilege level back to the default. • Assign the launch keyword (for example, configure) for the keyword's command mode. • If you assign only the first keyword to the privilege level, all commands beginning with that keyword are also assigned to the privilege level. If you enter the entire command, the software assigns the privilege level to that command only. To assign commands and passwords to a custom privilege level, you must be in privilege level 15 and use these commands in the following sequence in the CONFIGURATION mode: Step Command Syntax 1 username name [access-class access-list-name] [privilege level] [nopassword | password [encryption-type] password] 2 enable password [level level] [encryption-mode] password Command Mode CONFIGURATION CONFIGURATION Purpose Assign a user name and password. Configure the optional and required parameters: • name: Enter a text string (up to 63 characters). • access-class access-list-name: Enter the name of a configured IP ACL. • privilege level range: 0 to 15. • nopassword: Do not require the user to enter a password. • encryption-type: Enter 0 for plain text or 7 for encrypted text. • password: Enter a string. Configure a password for privilege level. Configure the optional and required parameters: • level level: Specify a level 0 to 15. Level 15 includes all levels. • encryption-type: Enter 0 for plain text or 7 for encrypted text. • password: Enter a string up to 25 characters long. To change only the password for the enable command, configure only the password parameter. 790 | Security