Dell Inspiron 14 - N4050 User Manual - Page 8

Back to Contents Page Camera Module Dell Inspiron M4040/14-N4050 Owner's Manual Removing the Camera Module Replacing the Camera Module WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance. CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell is not covered by your warranty. CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer). CAUTION: To help prevent damage to the system board, remove the main battery, see Removing the Battery, before working inside the computer. Removing the Camera Module 1. Follow the instructions in Before You Begin. 2. Remove the battery. See Removing the Battery. 3. Follow the instructions from step 3 to step 8 in Removing the Palm-Rest Assembly. 4. Remove the optical drive. See Removing the Optical Drive. 5. Remove the USB board. See "Removing the USB Board" on page 47. 6. Remove the hinge cover. See Removing the Hinge Cover. 7. Remove the display assembly. See Removing the Display Assembly. 8. Remove the display bezel. See Removing the Display Bezel. 9. Disconnect the camera cable from the connector on the camera module. 10. Release the tabs that secure the camera module to the display cover and lift the camera module off the display cover. 1 camera module 3 tabs (2) 2 camera cable Replacing the Camera Module