Dell Latitude D630 User's Guide - Page 162
Align the notch in the module edge connector with the tab in
UPC - 683728230456
View all Dell Latitude D630 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 162 highlights
2 1 1 securing clips (2 per connector) 2 memory module NOTICE: Insert memory modules at a 45-degree angle to avoid damaging the connector. 4 Ground yourself and install the new memory module: NOTE: If the memory module is not installed properly, the computer may not boot properly. No error message indicates this failure. a Align the notch in the module edge connector with the tab in the connector slot. b Slide the module firmly into the slot at a 45-degree angle, and rotate the module down until it clicks into place. If you do not feel the click, remove the module and reinstall it. 162 Adding and Replacing Parts
162
Adding and Replacing Parts
NOTICE:
Insert memory modules at a 45-degree angle to avoid damaging the
connector.
4
Ground yourself and install the new memory module:
NOTE:
If the memory module is not installed properly, the computer may not boot
properly. No error message indicates this failure.
a
Align the notch in the module edge connector with the tab in the
connector slot.
b
Slide the module firmly into the slot at a 45-degree angle, and rotate
the module down until it clicks into place. If you do not feel the click,
remove the module and reinstall it.
1
securing clips (2 per connector)
2
memory module
2
1