Dell Latitude E6530 Owners Manual - Page 44
Installing the System Board, WiFi-switch board
View all Dell Latitude E6530 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
12. Lift the edge of the system board to a 45-degree angle. 13. Release the system board from the ports and connectors. 14. Lift the system board from the computer. Installing the System Board 1. Place the system board on the chassis. 2. Tighten the screws to secure the system board to the computer. 3. Connect the following cables to the system board: a) WiFi-switch board b) speaker c) coin-cell battery d) LVDS 4. Route the antenna cables through the routing channels. 5. Install the LVDS support bracket in its position in the computer. 6. Tighten the screws to secure the LVDS support bracket to the computer 7. Connect the power connector cable to the system board. 44
12.
Lift the edge of the system board to a 45–degree angle.
13.
Release the system board from the ports and connectors.
14.
Lift the system board from the computer.
Installing the System Board
1.
Place the system board on the chassis.
2.
Tighten the screws to secure the system board to the computer.
3.
Connect the following cables to the system board:
a)
WiFi-switch board
b)
speaker
c)
coin-cell battery
d)
LVDS
4.
Route the antenna cables through the routing channels.
5.
Install the LVDS support bracket in its position in the computer.
6.
Tighten the screws to secure the LVDS support bracket to the computer
7.
Connect the power connector cable to the system board.
44