Dell OptiPlex 5090 Tower Service Manual - Page 22
in. hard-drive assembly, Removing the 3.5-inch hard-disk drive assembly
![]() |
View all Dell OptiPlex 5090 Tower manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Steps 1. Align the hard-drive assembly at an angle to the slot on the computer. 2. Press the release tabs on the hard-drive bracket and slightly align back to insert the hard-drive assembly to the slot on the computer chassis. 3. Connect the hard-drive data and power cables to the connectors on the 2.5-inch hard-drive module. Next steps 1. Install the fan duct. 2. Install the side cover. 3. Follow the procedure in after working inside your computer. 3.5 in. hard-drive assembly Removing the 3.5-inch hard-disk drive assembly Prerequisites 1. Follow the procedure in before working inside your computer. 22 Removing and installing components
![](/manual_guide/products/dell-optiplex-5090-tower-service-manual-38cd161/22.png)
Steps
1.
Align the hard-drive assembly at an angle to the slot on the computer.
2.
Press the release tabs on the hard-drive bracket and slightly align back to insert the hard-drive assembly to the slot on the
computer chassis.
3.
Connect the hard-drive data and power cables to the connectors on the 2.5-inch hard-drive module.
Next steps
1.
Install the
fan duct
.
2.
Install the
side cover
.
3.
Follow the procedure in
after working inside your computer
.
3.5 in. hard-drive assembly
Removing the 3.5-inch hard-disk drive assembly
Prerequisites
1.
Follow the procedure in
before working inside your computer
.
22
Removing and installing components