Dell OptiPlex 5090 Tower Service Manual - Page 38
Installing the graphics card, Prerequisites, About this task, Steps, Next steps
View all Dell OptiPlex 5090 Tower manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Installing the graphics card Prerequisites If you are replacing a component, remove the existing component before performing the installation procedure. About this task The following images indicate the location of the graphics card and provide a visual representation of the installation procedure. Steps 1. Align the graphics card with the PCI-Express card connector on the system board. 2. Using the alignment post, connect the graphics card in the connector and press down firmly. Ensure that the card is firmly seated. 3. Lift the pull tab to close the PCIe door. Next steps 1. Install the side cover. 2. Follow the procedure in after working inside your computer. 38 Removing and installing components
Installing the graphics card
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following images indicate the location of the graphics card and provide a visual representation of the installation procedure.
Steps
1.
Align the graphics card with the PCI-Express card connector on the system board.
2.
Using the alignment post, connect the graphics card in the connector and press down firmly. Ensure that the card is firmly
seated.
3.
Lift the pull tab to close the PCIe door.
Next steps
1.
Install the
side cover
.
2.
Follow the procedure in
after working inside your computer
.
38
Removing and installing components