Dell OptiPlex 5090 Tower Service Manual - Page 24
Solid-state drive, Removing the M.2 2230 PCIe solid-state drive
![]() |
View all Dell OptiPlex 5090 Tower manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Steps 1. Replace the fours (#6-32) screws and slide the hard-disk drive into the slots to secure it to the chassis. 2. Route the power cable and the data cable through the routing guides and connect the cables to the hard-disk drive. Next steps 1. Install the side cover. 2. Follow the procedure in after working inside your computer. Solid-state drive Removing the M.2 2230 PCIe solid-state drive Prerequisites 1. Follow the procedure in before working inside your computer. 2. Remove the side cover. 3. Remove the fan duct. About this task The following images indicate the location of the solid-state drive and provide a visual representation of the removal procedure. 24 Removing and installing components
![](/manual_guide/products/dell-optiplex-5090-tower-service-manual-38cd161/24.png)
Steps
1.
Replace the fours (#6-32) screws and slide the hard-disk drive into the slots to secure it to the chassis.
2.
Route the power cable and the data cable through the routing guides and connect the cables to the hard-disk drive.
Next steps
1.
Install the
side cover
.
2.
Follow the procedure in
after working inside your computer
.
Solid-state drive
Removing the M.2 2230 PCIe solid-state drive
Prerequisites
1.
Follow the procedure in
before working inside your computer
.
2.
Remove the
side cover
.
3.
Remove the
fan duct
.
About this task
The following images indicate the location of the solid-state drive and provide a visual representation of the removal procedure.
24
Removing and installing components