Dell OptiPlex 5090 Tower Service Manual - Page 40
Installing the powered GPU
View all Dell OptiPlex 5090 Tower manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Installing the powered GPU Prerequisites If you are replacing a component, remove the existing component before performing the installation procedure. About this task The following images indicate the location of the powered graphical processing unit and provide a visual representation of the installation procedure. Steps 1. Lift the pull tab to open the PCIe door. 2. Align the powered GPU with the PCI-Express card connector on the system board. 3. Using the alignment post, connect the powered GPU in the connector and press down firmly. Ensure that the powered GPU is firmly seated. 4. Connect the power cable to the connector on the powered GPU. 5. Close the PCIe door. Next steps 1. Install the side cover. 40 Removing and installing components