Dell OptiPlex 5090 Tower Service Manual - Page 56
Optional I/O modules (Type C/ HDMI/VGA/DP/Serial)
![]() |
View all Dell OptiPlex 5090 Tower manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Steps 1. Insert the intrusion switch into its slot and slide the switch to secure it into the slot. 2. Connect the intruder cable to the connector on the system board. Next steps 1. Install the fan duct. 2. Install the side cover. 3. Follow the procedure in after working inside your computer. Optional I/O modules (Type C/ HDMI/VGA/DP/Serial) Removing optional I/O modules (Type-C/HDMI/VGA/DP/Serial) Prerequisites 1. Follow the procedure in before working inside your computer. 2. Remove the side cover. 3. Remove the front bezel. 4. Remove the fan duct. About this task The following images indicate the location of the optional I/O Modules and provide a visual representation of the removal procedure. 56 Removing and installing components
![](/manual_guide/products/dell-optiplex-5090-tower-service-manual-38cd161/56.png)
Steps
1.
Insert the intrusion switch into its slot and slide the switch to secure it into the slot.
2.
Connect the intruder cable to the connector on the system board.
Next steps
1.
Install the
fan duct
.
2.
Install the
side cover
.
3.
Follow the procedure in
after working inside your computer
.
Optional I/O modules (Type C/ HDMI/VGA/DP/Serial)
Removing optional I/O modules (Type-C/HDMI/VGA/DP/Serial)
Prerequisites
1.
Follow the procedure in
before working inside your computer
.
2.
Remove the
side cover
.
3.
Remove the
front bezel
.
4.
Remove the
fan duct
.
About this task
The following images indicate the location of the optional I/O Modules and provide a visual representation of the removal
procedure.
56
Removing and installing components