Dell OptiPlex 5090 Tower Service Manual - Page 26
Removing the M.2 2280 PCIe solid-state drive
View all Dell OptiPlex 5090 Tower manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Steps 1. Align the notch on the solid-state drive with the tab on the solid-state drive connector. 2. Insert the solid-state drive at a 45-degree angle into the slot on the system board. 3. Replace the screw (M2x3.5) to secure the M.2 2230 solid-state drive to the system board. Next steps 1. Install the fan duct. 2. Install the side cover. 3. Follow the procedure in after working inside your computer. Removing the M.2 2280 PCIe solid-state drive Prerequisites 1. Follow the procedure in before working inside your computer. 2. Remove the side cover. 3. Remove the fan duct. About this task The following images indicate the location of the solid-state drive and provide a visual representation of the removal procedure. 26 Removing and installing components