Dell OptiPlex 5090 Tower Service Manual - Page 36

Removing and installing components, When the processor is fully seated in the socket

Get Dell OptiPlex 5090 Tower PDF manuals and user guides View all Dell OptiPlex 5090 Tower manuals
Add to My Manuals
Save this manual to your list of manuals

Page 36 highlights

Steps 1. Ensure that the release lever on the processor socket is fully extended in the open position. 2. Align the notches on the processor with the tabs on the processor socket and place the processor in the processor socket. NOTE: The pin 1 corner of the processor has a triangle that aligns with the triangle on the pin 1 corner on the processor socket. When the processor is properly seated, all four corners are aligned at the same height. If one or more corners of the processor are higher than the others, the processor is not seated properly. 3. When the processor is fully seated in the socket, pivot the release-lever down and place it under the tab on the processor cover. Next steps 1. Install the processor fan and heat-sink assembly. 2. Install the fan duct. 3. Install the side cover. 4. Follow the procedure in after working inside your computer. 36 Removing and installing components

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
Steps
1.
Ensure that the release lever on the processor socket is fully extended in the open position.
2.
Align the notches on the processor with the tabs on the processor socket and place the processor in the processor socket.
NOTE:
The pin 1 corner of the processor has a triangle that aligns with the triangle on the pin 1 corner on the processor
socket. When the processor is properly seated, all four corners are aligned at the same height. If one or more corners of
the processor are higher than the others, the processor is not seated properly.
3.
When the processor is fully seated in the socket, pivot the release-lever down and place it under the tab on the processor
cover.
Next steps
1.
Install the
processor fan and heat-sink assembly
.
2.
Install the
fan duct
.
3.
Install the
side cover
.
4.
Follow the procedure in
after working inside your computer
.
36
Removing and installing components