Dell OptiPlex 7010 Owner's Manual (Desktop) - Page 24

Installing The Heat Sink, Removing The Processor

Get Dell OptiPlex 7010 PDF manuals and user guides View all Dell OptiPlex 7010 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 24 highlights

Installing The Heat Sink 1. Place the heat sink into the chassis. 2. Use a Phillips screwdriver to tighten the captive screws securing the heat sink to the system board. 3. Connect the heat sink cable to the system board. 4. Install the cover. 5. Follow the procedures in After Working Inside Your Computer. Removing The Processor 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the cover. 3. Remove the heat sink. 4. Press the release lever down and then move it outward to release it from the retention hook that secures it. Lift the processor cover and remove the processor from its socket. 24

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
Installing The Heat Sink
1.
Place the heat sink into the chassis.
2.
Use a Phillips screwdriver to tighten the captive screws securing the heat sink to the system board.
3.
Connect the heat sink cable to the system board.
4.
Install the cover.
5.
Follow the procedures in
After Working Inside Your Computer
.
Removing The Processor
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the cover.
3.
Remove the heat sink.
4.
Press the release lever down and then move it outward to release it from the retention hook that secures it. Lift the
processor cover and remove the processor from its socket.
24