Dell OptiPlex 7010 Owner's Manual (Desktop) - Page 30
Installing The Front Thermal Sensor, Removing The Power Switch
View all Dell OptiPlex 7010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Installing The Front Thermal Sensor 1. Secure the thermal sensor to the chassis front. 2. Thread the thermal-sensor cable into the chassis clips. 3. Connect the thermal-sensor cable to the system board. 4. Install the hard drive. 5. Install the front bezel. 6. Install the cover. 7. Follow the procedures in After Working Inside Your Computer. Removing The Power Switch 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the a) cover b) front bezel 3. Press in and lift to release the power-switch cable from the system board. 30
Installing The Front Thermal Sensor
1.
Secure the thermal sensor to the chassis front.
2.
Thread the thermal-sensor cable into the chassis clips.
3.
Connect the thermal-sensor cable to the system board.
4.
Install the hard drive.
5.
Install the front bezel.
6.
Install the cover.
7.
Follow the procedures in
After Working Inside Your Computer
.
Removing The Power Switch
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the
a)
cover
b)
front bezel
3.
Press in and lift to release the power-switch cable from the system board.
30