Dell OptiPlex 7010 Owner's Manual (Desktop) - Page 25
Installing The Processor, Removing The System Fan
View all Dell OptiPlex 7010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Installing The Processor 1. Insert the processor into the processor socket. Ensure the processor is properly seated. The golden triangle mark on the processor should align with the triangle mark on the system board. 2. Gently lower the processor cover. 3. Press the release lever down and then move it inward to secure it with the retention hook. 4. Install the heat sink. 5. Install the cover. 6. Follow the procedures in After Working Inside Your Computer. Removing The System Fan 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the a) cover b) front bezel c) optical drive d) hard drive 3. Press the plastic clip to release the system-fan cable from the system board. 25
Installing The Processor
1.
Insert the processor into the processor socket. Ensure the processor is properly seated. The golden triangle mark
on the processor should align with the triangle mark on the system board.
2.
Gently lower the processor cover.
3.
Press the release lever down and then move it inward to secure it with the retention hook.
4.
Install the heat sink.
5.
Install the cover.
6.
Follow the procedures in
After Working Inside Your Computer
.
Removing The System Fan
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the
a)
cover
b)
front bezel
c)
optical drive
d)
hard drive
3.
Press the plastic clip to release the system-fan cable from the system board.
25