Dell OptiPlex 7010 Owner's Manual (Desktop) - Page 32
Installing The Power Switch, Removing The Input/Output Panel
View all Dell OptiPlex 7010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Installing The Power Switch 1. Slide the power-switch cable in through the front of the computer. 2. Secure the power-switch cable to the chassis. 3. Connect the power-switch cable to the system board. 4. Install the front bezel. 5. Install the cover. 6. Follow the procedures in After Working Inside Your Computer. Removing The Input/Output Panel 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the a) cover b) front bezel c) hard drive d) optical drive 3. Disconnect the 24-pin connector from the system board. 32
Installing The Power Switch
1.
Slide the power-switch cable in through the front of the computer.
2.
Secure the power-switch cable to the chassis.
3.
Connect the power-switch cable to the system board.
4.
Install the front bezel.
5.
Install the cover.
6.
Follow the procedures in
After Working Inside Your Computer
.
Removing The Input/Output Panel
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the
a)
cover
b)
front bezel
c)
hard drive
d)
optical drive
3.
Disconnect the 24–pin connector from the system board.
32