Dell OptiPlex GX260 Service Manual - Page 88

Small Desktop Computer: Dell OptiPlex GX260 Service Manual, Removing the Card Cage

Get Dell OptiPlex GX260 PDF manuals and user guides View all Dell OptiPlex GX260 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 88 highlights

Back to Contents Page Small Desktop Computer Dell™ OptiPlex™ GX260 Service Manual PCI Cards Serial Port Adapters AGP and DVI Adapter Cards NOTE: Before disconnecting a device from the computer or removing a component from the system board, verify that the standby power light on the system board is off. For the location of this light, see "System Board." PCI Cards Removing a PCI Card CAUTION: Before you perform this procedure, see "Precautionary Measures." 1. Remove the card cage: a. Check any cables connected to cards through the back-panel openings. Disconnect any cables that will not reach the card cage once the cage is removed from the computer. b. Gently pull the handle and lift the card cage up and away from the computer. Removing the Card Cage 1 card cage 2 handle 2. Press the lever on the retention arm and raise the retention arm. Raising the Retention Arm and Installing a Card

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
Back to Contents Page
Small Desktop Computer
Dell™ OptiPlex™ GX260 Service Manual
PCI Cards
Serial Port Adapters
AGP and DVI Adapter Cards
NOTE:
Before disconnecting a device from the computer or removing a component from the system board, verify that
the standby power light on the system board is off. For the location of this light, see "
System Board
."
PCI Cards
Removing a PCI Card
CAUTION:
Before you perform this procedure, see "
Precautionary Measures
."
1. Remove the card cage:
a. Check any cables connected to cards through the back-panel openings. Disconnect any cables that will not reach
the card cage once the cage is removed from the computer.
b. Gently pull the handle and lift the card cage up and away from the computer.
Removing the Card Cage
1
card cage
2
handle
2. Press the lever on the retention arm and raise the retention arm.
Raising the Retention Arm and Installing a Card