Dell OptiPlex Micro Plus 7010 Owners Manual - Page 37
Removing the M.2 2230 solid-state drive from slot 1, Steps, Next steps, Prerequisites, About this task
View all Dell OptiPlex Micro Plus 7010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Steps 1. Align the notch on the M.2 2230 solid-state drive with the tab on the solid-state drive slot 0 (M.2 PCIe SSD 0). 2. Slide the M.2 2230 solid-state drive into the solid-state drive slot 0 (M.2 PCIe SSD 0) on the system board. 3. Replace the screw (M2x3.5) that secures the M.2 2230 solid-state drive to the system board Next steps 1. Install the side cover. 2. Follow the procedure in After working inside your computer. Removing the M.2 2230 solid-state drive from slot 1 Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the side cover. About this task NOTE: Depending on the configuration ordered, your computer may have an M.2 2230 or an M.2 2280 solid-state drive installed in the solid-state drive slot 1 (M.2 PCIe SSD 1) on the system board. NOTE: This procedure is applicable for computers where an M.2 2230 solid-state drive is installed in the solid-state drive slot 1 (M.2 PCIe SSD 1) on the system board. The following image(s) indicate the location of the M.2 2230 solid-state drive in slot 1 and provides a visual representation of the removal procedure. Removing and installing Customer Replaceable Units (CRUs) 37