Dell OptiPlex Micro Plus 7010 Owners Manual - Page 76
Installing SMA antenna assembly
View all Dell OptiPlex Micro Plus 7010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Steps 1. Remove the SMA antenna assembly cables from the routing guides on the chassis. 2. Remove the screw (M3x3) that secures the SMA antenna assembly to the chassis. 3. Push the SMA antenna assembly inside from the opening on the back view and lift it away from the chassis. Installing SMA antenna assembly Prerequisites If you are replacing a component, remove the existing component before performing the installation procedure. About this task The following images indicate the location of SMA antenna assembly and provide a visual representation of the removal procedure. NOTE: To upgrade to SMA antenna, the internal antenna (white cable) needs to be removed. 76 Removing and installing Field Replaceable Units (FRUs)
Steps
1.
Remove the SMA antenna assembly cables from the routing guides on the chassis.
2.
Remove the screw (M3x3) that secures the SMA antenna assembly to the chassis.
3.
Push the SMA antenna assembly inside from the opening on the back view and lift it away from the chassis.
Installing SMA antenna assembly
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following images indicate the location of SMA antenna assembly and provide a visual representation of the removal
procedure.
NOTE:
To upgrade to SMA antenna, the internal antenna (white cable) needs to be removed.
76
Removing and installing Field Replaceable Units (FRUs)