Dell OptiPlex Micro Plus 7010 Owners Manual - Page 59
Removing and installing Field Replaceable Units FRUs
View all Dell OptiPlex Micro Plus 7010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
The following images indicate the location of the optional I/O module and provide a visual representation of the removal procedure. Steps 1. Remove the two (M3x3) screws that secure the optional I/O module (HDMI/DP/PS2) or two (M2x5) cross type screws that secure the optional I/O module (VGA/Serial) to the computer chassis. 2. Disconnect the I/O-module cable from the connector on the system board. 3. Remove the optional I/O module from the computer. Removing and installing Field Replaceable Units (FRUs) 59
The following images indicate the location of the optional I/O module and provide a visual representation of the removal
procedure.
Steps
1.
Remove the two (M3x3) screws that secure the optional I/O module (HDMI/DP/PS2) or two (M2x5) cross type screws
that secure the optional I/O module (VGA/Serial) to the computer chassis.
2.
Disconnect the I/O-module cable from the connector on the system board.
3.
Remove the optional I/O module from the computer.
Removing and installing Field Replaceable Units (FRUs)
59