Dell OptiPlex Micro Plus 7010 Owners Manual - Page 58

Optional I/O modules (HDMI/VGA/DP/Serial), Removing the optional I/O module (HDMI/VGA/DP/Serial/PS2)

Get Dell OptiPlex Micro Plus 7010 PDF manuals and user guides View all Dell OptiPlex Micro Plus 7010 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 58 highlights

Steps 1. Place the heat sink on the system board and the system board. 2. Align the screw holes on the heat sink with the screw holes on the system board. 3. In sequential order (1>2>3) tighten the three captive screws that secure the heat sink to the system board. Next steps 1. Install the fan. 2. Install the speaker. 3. Install the side cover. 4. Follow the procedure in After working inside your computer. Optional I/O modules (HDMI/VGA/DP/Serial) Removing the optional I/O module (HDMI/VGA/DP/Serial/PS2) Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the side cover. About this task NOTE: The optional PS2 module comes with a custom Dell adapter cable that is required to access the PS2 I/O ports. Plug in the adapter cable to access the PS2 I/O and COM ports of your computer. NOTE: This is an example of the procedure and removal steps are applicable for optional I/O module (HDMI/VGA/DP/ Serial/PS2). 58 Removing and installing Field Replaceable Units (FRUs)

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
Steps
1.
Place the heat sink on the system board and the system board.
2.
Align the screw holes on the heat sink with the screw holes on the system board.
3.
In sequential order (1>2>3) tighten the three captive screws that secure the heat sink to the system board.
Next steps
1.
Install the
fan
.
2.
Install the
speaker
.
3.
Install the
side cover
.
4.
Follow the procedure in
After working inside your computer
.
Optional I/O modules (HDMI/VGA/DP/Serial)
Removing the optional I/O module (HDMI/VGA/DP/Serial/PS2)
Prerequisites
1.
Follow the procedure in
Before working inside your computer
.
2.
Remove the
side cover
.
About this task
NOTE:
The optional PS2 module comes with a custom Dell adapter cable that is required to access the PS2 I/O ports. Plug
in the adapter cable to access the PS2 I/O and COM ports of your computer.
NOTE:
This is an example of the procedure and removal steps are applicable for optional I/O module (HDMI/VGA/DP/
Serial/PS2).
58
Removing and installing Field Replaceable Units (FRUs)