Dell OptiPlex Micro Plus 7010 Owners Manual - Page 61
Optional Type-C module, Removing the optional Type-C module
View all Dell OptiPlex Micro Plus 7010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
2. Insert the optional I/O module into its slot from the inside of your computer. 3. Connect the I/O cable to the connector on the system board. 4. Replace the two (M3x3) screws that secure the optional I/O module (HDMI/DP/PS2) or two (M2x5) cross type screws that secure the optional I/O module (VGA/Serial) to the computer chassis. Next steps 1. Install the side cover. 2. Follow the procedure in After working inside your computer. Optional Type-C module Removing the optional Type-C module Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the side cover. About this task The following images indicate the location of the optional Type-C module and provide a visual representation of the removal procedure. Steps 1. Remove the two (M3x3) screws that secure the optional Type-C module. 2. Remove the optional Type-C module from its slot on the chassis. 3. Lift and hold the optional Type-C module in place above the system board. 4. Disconnect the Type-C DisplayPort cable from the system board. 5. Disconnect the Type-C USB cable from the system board. 6. Remove the optional Type-C module from the computer. Removing and installing Field Replaceable Units (FRUs) 61