Dell OptiPlex Micro Plus 7010 Owners Manual - Page 55
Steps, To prevent damage to the memory module, hold the memory module by the edges. Do not touch
View all Dell OptiPlex Micro Plus 7010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Steps 1. Ensure that the securing clips are in an open position 2. Align the notch on the memory module with the tab on the memory-module slot. 3. Press down on the memory module until the memory module snaps into position and the securing clip locks in place CAUTION: To prevent damage to the memory module, hold the memory module by the edges. Do not touch the components on the memory module. NOTE: Repeat step 1 to step 3 when installing more than one memory module in your computer. Next steps 1. Install the fan. 2. Install the speaker. 3. Install the side cover. 4. Follow the procedure in After working inside your computer. Removing and installing Customer Replaceable Units (CRUs) 55
Steps
1.
Ensure that the securing clips are in an open position
2.
Align the notch on the memory module with the tab on the memory-module slot.
3.
Press down on the memory module until the memory module snaps into position and the securing clip locks in place
CAUTION:
To prevent damage to the memory module, hold the memory module by the edges. Do not touch
the components on the memory module.
NOTE:
Repeat step 1 to step 3 when installing more than one memory module in your computer.
Next steps
1.
Install the
fan
.
2.
Install the
speaker
.
3.
Install the
side cover
.
4.
Follow the procedure in
After working inside your computer
.
Removing and installing Customer Replaceable Units (CRUs)
55