Dell OptiPlex Micro Plus 7010 Owners Manual - Page 41
Removing the M.2 2280 solid-state drive from slot 1
![]() |
View all Dell OptiPlex Micro Plus 7010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Steps 1. Align the notch on the M.2 2280 solid-state drive with the tab on the solid-state drive slot 0 (M.2 PCIe SSD 0). 2. Slide the M.2 2280 solid-state drive into the solid-state drive slot (M.2 PCIe SSD 0) on the system board. 3. Replace the screw (M2x3.5) that secures the M.2 2280 solid-state drive to the system board Next steps 1. Install the side cover. 2. Follow the procedure in After working inside your computer. Removing the M.2 2280 solid-state drive from slot 1 Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the side cover. About this task NOTE: Depending on the configuration ordered, your computer may have an M.2 2230 or an M.2 2280 solid-state drive installed in solid-state drive slot 1 (M.2 PCIe SSD 1) on the system board. NOTE: This procedure is applicable for computers where an M.2 2280 solid-state drive is installed in solid-state drive slot 1 (M.2 PCIe SSD 1) on the system board. The following image(s) indicate the location of the M.2 2280 solid-state drive in slot 1 and provides a visual representation of the removal procedure. Removing and installing Customer Replaceable Units (CRUs) 41
![](/manual_guide/products/dell-optiplex-micro-plus-7010-owners-manual-0fcee1b/41.png)