Dell P713W User's Guide - Page 98
Print troubleshooting, Poor quality at the edges of the Streaks or lines on printed image - replacement printhead
View all Dell P713W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
Print troubleshooting • "Poor quality at the edges of the page" on page 98 • "Streaks or lines on printed image" on page 98 • "Print speed is slow" on page 99 • "Computer slows down when printing" on page 99 Poor quality at the edges of the page If the "Before you troubleshoot" checklist does not solve the problem, then try one or more of the following: CHECK MINIMUM PRINT SETTINGS Unless you are using the borderless feature, use these minimum print margin settings: • Left and right margins: - 6.35 mm (0.25 in.) for letter-size paper - 3.37 mm (0.133 in.) for all paper sizes except letter • Top margin: 1.7 mm (0.067 in.) • Bottom margin: 12.7 mm (0.5 in.) SELECT THE BORDERLESS PRINT FEATURE 1 With a document or photo open, click File Print. 2 Click Properties, Preferences, Options, or Setup. 3 From the Paper Options section of the Print Setup tab, select Borderless. Streaks or lines on printed image If the "Before you troubleshoot" checklist does not solve the problem, then try one or more of the following: CHECK THE INK LEVELS Replace low or empty ink cartridges. SELECT A HIGHER PRINT QUALITY FROM THE PRINTER SOFTWARE MAKE SURE THE INK CARTRIDGES ARE PROPERLY INSTALLED ALIGN THE PRINTHEAD CLEAN OR DEEP CLEAN THE PRINTHEAD NOZZLES Note: If these solutions do not remove the streaks or lines on the printed image, then contact technical support. Troubleshooting 98