Dell PowerConnect B-RX BigIron RX Series Configuration Guide v02.8.00 - Page 1032

32 Re-enabling an interface • If the violation action configured for an interface is the same as the action the interface is currently inheriting from the global level, then the violation action for the interface is applied to the interface. It no longer inherits the action at the global level. Re-enabling an interface The violation action of violation shutdown or violation restrict have options that can be configured to cause an interface to shutdown. If the shutdown option is selected, the following options can be used to re-enable an interface. Interface shutdown time You can specify how long an interface remains shutdown when violation shutdown or violation restrict is configured. For example, you can enter commands such as the following. BigIron RX(config)# int e 7/11 BigIron RX(config-if-e100-7/11)#port security BigIron RX(config-port-security-e100-7/11)# violation shutdown BigIron RX(config-port-security-e100-7/11)#shutdown-time 60 Syntax: [no] shutdown-time Enter 0 - 1440 minutes, with 0 as the default. Specifying 0 shuts down the interface permanently when a MAC Port Security violation occurs. Manually re-enabling a interface Once an interface is permanently shut down, an administrator must re-enable the interface by entering the following command. BigIron RX(config)# int e 7/11 BigIron RX(config-if-e100-7/11)#enable Syntax: enable Displaying MAC Port Security information The following sections present the reports that can be displayed for MAC Port Security. Displaying MAC Port Security settings You can display the MAC Port Security settings for the device. 956 BigIron RX Series Configuration Guide 53-1002253-01