Dell PowerConnect B-RX BigIron RX Series Configuration Guide v02.8.00 - Page 1257

Displaying BGP4+ information 45 TABLE 206 Detailed best and unreachable routes from a BGP4+ neighbor This field... Displays... Number of accepted routes from a specified neighbor (appears only in display for all routes) Status codes Prefix Status Age Next Hop Learned from Peer LOCAL_PREF MED Origin Weight AS-PATH For information about this field, refer to Table 205 on page 1179. For information about this field, refer to Table 205 on page 1179. For information about this field, refer to Table 205 on page 1179. For information about this field, refer to Table 205 on page 1179. The age of the route, in seconds. For information about this field, refer to Table 205 on page 1179. The IPv6 address of the neighbor from which this route is learned. "Local Router" indicates that the switch itself learned the route. For information about this field, refer to Table 205 on page 1179. The value of the RIB route's MED attribute. If the route does not have a metric, this field is blank. The source of the route information. The origin can be one of the following: • EGP - The routes with this set of attributes came to BGP4+ through EGP. • IGP - The routes with this set of attributes came to BGP4+ through IGP. • INCOMPLETE - The routes came from an origin other than one of the above. For example, they may have been redistributed from OSPFv3 or RIPng. When BGP4+ compares multiple routes to a destination to select the best route, IGP is preferred over EGP and both are preferred over INCOMPLETE. For information about this field, refer to Table 205 on page 1179. For information about this field, refer to Table 205 on page 1179. Displaying IPv6 neighbor route summary information You can display route summary information for all neighbors or a specified neighbor only. For example, to display summary information for neighbor 2000:4::110, enter the following command at any level of the CLI. BigIron RX Series Configuration Guide 53-1002253-01 1181