Dell PowerConnect B-RX BigIron RX Series Configuration Guide v02.8.00 - Page 904

26 Displaying BGP4 information BigIron RX(config-bgp)# show ip bgp neighbor 192.168.4.211 routes-summary 1 IP Address: 192.168.4.211 Routes Accepted/Installed:1, Filtered/Kept:11, Filtered:11 Routes Selected as BEST Routes:1 BEST Routes not Installed in IP Forwarding Table:0 Unreachable Routes (no IGP Route for NEXTHOP):0 History Routes:0 NLRIs Received in Update Message:24, Withdraws:0 (0), Replacements:1 NLRIs Discarded due to Maximum Prefix Limit:0, AS Loop:0 Invalid Nexthop:0, Invalid Nexthop Address:0.0.0.0 Duplicated Originator_ID:0, Cluster_ID:0 Routes Advertised:0, To be Sent:0, To be Withdrawn:0 NLRIs Sent in Update Message:0, Withdraws:0, Replacements:0 Peer Out of Memory Count for: Receiving Update Messages:0, Accepting Routes(NLRI):0 Attributes:0, Outbound Routes(RIB-out):0 Syntax: show ip bgp neighbors [] | [route-summary] This display shows the following information. TABLE 125 BGP4 route summary information for a neighbor This field... Displays... IP Address Routes Received Routes Selected as BEST Routes BEST Routes not Installed in IP Forwarding Table Unreachable Routes History Routes NLRIs Received in Update Message The IP address of the neighbor How many routes the device has received from the neighbor during the current BGP4 session. • Accepted/Installed - Indicates how many of the received routes the device accepted and installed in the BGP4 route table. • Filtered/Kept - Indicates how many routes were filtered out, but were nonetheless retained in memory for use by the soft reconfiguration feature. • Filtered - Indicates how many of the received routes were filtered out. The number of routes that the device selected as the best routes to their destinations. The number of routes received from the neighbor that are the best BGP4 routes to their destinations, but were nonetheless not installed in the IP route table because the device received better routes from other sources (such as OSPF, RIP, or static IP routes). The number of routes received from the neighbor that are unreachable because the device does not have a valid RIP, OSPF, or static route to the next hop. The number of routes that are down but are being retained for route flap dampening purposes. The number of routes received in Network Layer Reachability (NLRI) format in UPDATE messages. • Withdraws - The number of withdrawn routes the device has received. • Replacements - The number of replacement routes the device has received. 828 BigIron RX Series Configuration Guide 53-1002253-01