Dell PowerConnect B-RX BigIron RX Series Configuration Guide v02.8.00 - Page 579

Configuring multicast traffic engineering 18 NOTE The configurations for group port 1 will now be associated to s/1,s/5,s/9,s/13 3. To set the group port 2 weight, low prioriy traffic, BigIron RX(config-if-e10000-4/1)#qos rcv-scheduler wfq 1 2 1 4. To set the group port 2 weight, high prioriy traffic, BigIron RX(config-if-e10000-4/1)#qos rcv-scheduler wfq 1 2 1 2 NOTE The configurations for group port 2 will now be associated to s/2,s/6,s/10,s/14 5. To set the group port 3 weight, low prioriy traffic, BigIron RX(config-if-e10000-4/1)#qos rcv-scheduler wfq 1 2 1 2 1 6. To set the group port 3 weight, high prioriy traffic, BigIron RX(config-if-e10000-4/1)#qos rcv-scheduler wfq 1 2 1 2 1 2 NOTE The configurations for group port 3 will now be associated to s/3,s/7,s/11,s/15 7. To set the group port 4 weight, low prioriy traffic, BigIron RX(config-if-e10000-4/1)#qos rcv-scheduler wfq 1 2 1 2 1 2 1 8. To set the group port 4 weight, high prioriy traffic, BigIron RX(config-if-e10000-4/1)#qos rcv-scheduler wfq 1 2 1 2 1 2 1 2 NOTE The configurations for group port 4 will now be associated to s/4,s/8,s/12,s/16 Use rcv-scheduler to change the receive scheduling parameters on the 16x10G card. Use scheduler to assign a scheduling mechanism to one or more ports. Use the no parameter to return to the default mode. (Server) Use the num parameter to set the port weight. BigIron RX Series Configuration Guide 503 53-1002253-01