Dell PowerConnect J-8216 Software Guide for JUNOS version 10.3 - Page 1879

Chapter 74: Operational Commands for Layer 3 Protocols Table 214: show bgp group Output Fields (continued) Field Name Field Description Level of Output AS AS number of the peer. For internal BGP (IBGP), this number is the brief detail same as Local AS. none Local AS AS number of the local routing device. brief detail none Name Name of a specific BGP group. brief detail none Flags Flags associated with the BGP group. This field is used by Dell Support (see "Requesting Technical Support" on page lxxi). brief detail none Export Export policies configured for the BGP group with the export statement. brief detail none MED tracks IGP metric update delay Time interval, in seconds, that updates to multiple exit discriminator All (MED) are delayed. Also displays the time remaining before the interval is set to expire Total peers Total number of peers in the group. brief detail none Established Number of peers in the group that are in the established state. All levels Active/Received/Accepted/Damped Multipurpose field that displays information about BGP peer sessions. The field's contents depend upon whether a session is established and whether an established session was established in the main routing device or in a routing instance. summary • If a peer is not established, the field shows the state of the peer session: Active, Connect, or Idle. • If a BGP session is established in the main routing device, the field shows the number of active, received, accepted, and damped routes that are received from a neighbor and appear in the inet.0 (main) and inet.2 (multicast) routing tables. For example, 8/10/10/2 and 2/4/4/0 indicate the following: • 8 active routes, 10 received routes, 10 accepted routes, and 2 damped routes from a BGP peer appear in the inet.0 routing table. • 2 active routes, 4 received routes, 4 accepted routes, and no damped routes from a BGP peer appear in the inet.2 routing table. ip-addresses List of peers who are members of the group. The address is followed All levels by the peer's port number. Route Queue Timer Number of seconds until queued routes are sent. If this time has already elapsed, this field displays the number of seconds by which the updates are delayed. detail 1807