Dell PowerConnect J-8216 Software Guide for JUNOS version 10.3 - Page 3494

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS Table 454: show services rpm probe-results Output Fields (continued) Field Name Field Description Routing Instance Name (BGP neighbor discovery) Name of the configured (if any) routing instance, logical system name, or both, in which the probe is configured: • When a routing instance is defined within a logical system, the logical system name is followed by the routing instance name. A slash ( / ) is used to separate the two entities. For example, if the routing instance called R1 is configured within the logical system called LS, the name in the output field is LS/R1. • When a routing instance is configured but the default logical system is used, the name in the output field is the name of the routing instance. • When a logical system is configured but the default routing instance is used, the name in the output field is the name of the logical system followed by default. A slash (/) is used to separate the two entities. For example, LS/default. Probe results Raw measurement of a particular probe sample done by a remote host. This data is provided separately from the calculated results. The following information is contained in the raw measurement: • Response received-Timestamp when the probe result was determined. • Client and server hardware timestamps-If timestamps are configured, an entry appears at this point. • Rtt-Average ping round-trip time (RTT), in microseconds. • Egress jitter-Egress jitter, in microseconds. • Ingress jitter-Ingress jitter, in microseconds. • Round trip jitter-Round-trip jitter, in microseconds. • Egress interarrival jitter-Egress interarrival jitter, in microseconds. • Ingress interarrival jitter-Ingress interarrival jitter, in microseconds. • Round trip interarrival jitter-Round-trip interarrival jitter, in microseconds. Results over current test Probes are grouped into tests, and the statistics are calculated for each test. If a test contains 10 probes, the average, minimum, and maximum results are calculated from the results of those 10 probes. If the command is issued while the test is in progress, the statistics use information from the completed probes. • Probes sent-Number of probes sent within the current test. • Probes received-Number of probe responses received within the current test. • Loss percentage-Percentage of lost probes for the current test. • Measurement-Measurement type. Possible values are round-trip time, positive round-trip jitter, negative round-trip jitter, egress time, positive egress jitter, negative egress jitter, ingress time, positive ingress jitter, negative ingress jitter, and, for the probe type icmp-ping-timestamp, the egress delay and ingress delay. For each measurement type, the following individual calculated results are provided: • Samples-Number of probes. • Minimum-Minimum RTT, ingress delay, or egress delay measured over the course of the current test. • Maximum-Maximum RTT, ingress delay, or egress delay measured over the course of the current test. • Average-Average RTT, ingress delay, or egress delay measured over the course of the current test. • Peak to peak-Peak-to-peak difference, in microseconds. • Stddev-Standard deviation, in microseconds. • Sum-Statistical sum. 3422